Build a Peace Light Lantern Carrier

To transport the Peace Light safely, it better to build a carrier to suit the lamp/lantern you intend to use. The plan below is intended as a guide and dimensions will relevant to the lamp and resources you have available. If you have somebody who can manufacture the carrier from scratch all the better. However if you are not that lucky, try your local sweet shop, see if they have any of the large "tin buckets" that Chubba Chub lollipops are sold in.

Line the base of the bucket with non combustable material, an acoustic ceiling tile is ideal, cutting a suitable hole for the base of your lamp to sit. Three quarters of the way up the side of the bucket, cut some ventilation holes for the lamp (beware of any sharp edges). Next take the lid and cut a hole approx 3" diameter in the centre of it, now fabricate a cover for the hole that will stand on three or four "legs" again to ventilate the lamp. Finally make a hook that can be fixed into the cover you have just made, that will hang down and secure the lamp.

Original Web Page Compiled by "G@Z" 9/2001

Last Updated 14-11-2004